Gridfinity Modified 1x1
Gridfinity-1x1x15.stl
Gridfinity-1x1x15.stp
Gridfinity-1x1x20.stl
Gridfinity-1x1x20.stp
Gridfinity-1x1x25.stl
Gridfinity-1x1x25.stp
Gridfinity-1x1x30.stl
Gridfinity-1x1x30.stp
Gridfinity-1x1x35.stl
Gridfinity-1x1x35.stp
Gridfinity-1x1x40.stl
Gridfinity-1x1x40.stp
Gridfinity-1x1x45.stl
Gridfinity-1x1x45.stp
Gridfinity-1x1x50.stl
Gridfinity-1x1x50.stp
Gridfinity-1x1x55.stl
Gridfinity-1x1x55.stp
Gridfinity-1x1x60.stl
Gridfinity-1x1x60.stp
Gridfinity-1x1x65.stl
Gridfinity-1x1x65.stp
Gridfinity-1x1x70.stl
Gridfinity-1x1x70.stp
Gridfinity-1x1x75.stl
Gridfinity-1x1x75.stp
Gridfinity Original
Based on the Gridfinity System from Zack Freedman
https://thangs.com/designer/ZackFreedman 
https://www.youtube.com/c/ZackFreedman 
Lizenz:
CC BY-NC-SA 4.0
https://creativecommons.org/licenses/by-nc-sa/4.0/deed.de 
Licence:
CC BY-NC-SA 4.0
https://creativecommons.org/licenses/by-nc-sa/4.0/ 
Gridfinity Modified: Änderungen/Changes
Ich benötige andere Maße und habe deshalb die Höhenangaben in 5mm Schritte geändert.
I need other dimensions and changed the height in 5mm steps.
Den Absatz, ca. 3mm von oben, auf der Innenseite, habe ich entfernt.
I removed the inner step, 3mm from the top.
Maße/Dimensions
1x1x15 = Die ersten beiden Zahlen sind gleich wie im bisherigen System, die dritte Zahl ist die Gesamthöhe in mm
1x1x15 = The first two numbers are the same as in the original system, the third number is the total height in mm.
.stp & .stl Dateien
.stp & .stl files
Zur Übersicht